Humbucker Range - VINTAGE CLASSICS (PAF VINTAGE-CORRECT)
£85.00
This model is a PAF copy to the highest standards. All the components are vintage-correct. The baseplate, bobbins, cover, magnets, spacers, keeper bars, pole-pieces and screws are all carefully sourced replicas of the materials and dimensions used in the Original PAFs. Early PAFs varied in terms of magnet choice and number of winds, but what we use here is the best recipe we've found for reproducing our favourite PAF sounds.
Their asymmetric winding offers full lows and sweet highs. Their low output coupled with the Alnico IV magnets allows for clear clean sounds and good sustain; warm and creamy when overdriven.
|
|
Neck |
Bridge |
||
Feature |
Screw Side |
Slug Side |
Slug Side |
Screw Side |
|
Wire gauge |
42 |
42 |
42 |
42 |
|
Wire coating |
Plain Enamel | Plain Enamel | ||
|
Bobbins |
Butyrate | Butyrate | ||
|
Magnet |
AlNiCo IV Rough Cast |
AlNiCo IV Rough Cast |
||
| Magnet sealant | Nitrocellulose Lacquer | Nitrocellulose Lacquer | ||
|
Polarity |
South |
North |
North |
South |
|
Cover |
Raw Nickel-Silver | Raw Nickel-Silver | ||
|
Approximate DCR |
7.2 kΩ |
7.6 kΩ |
||
The neck and bridge pickup both have pole-spacing of 49.2 mm as in original PAFs.
Screws and spacers are provided.
All Amdusias Devices pickups are hand-wound, resulting in greater clarity and frequency range compared to machine-wound pickups. This is due to greater tension control of wire fed through the fingers and reduced capacitance between the scattered winds…this is the beauty of human touch that can't be recreated by machines.
Note: Our PAF Vintage Corrects require parts sourced from the USA per order. There is a 2 week lead time for us to deliver to you...but we will be in touch all the way.
